Buying a compliant sign is step one. Good pool sign installation is step two. This short guide covers where to put your signs and how to fix them to common surfaces. For exact mounting heights and positions, confirm with your state authority or a licensed pool safety inspector.
Where to place your signs
- Keep it visible : Signs should be easy to see from the pool area and never hidden by plants, sheds or equipment.
- Choose a logical spot : A CPR sign belongs beside the pool, fixed to the barrier or a nearby wall. Don't put it on a gate that is often open or in a corner no one uses.
- Think about sun and glare : Avoid positions that bake in direct sun all day or reflect glare at certain times.
A flat, clear section of fence or wall near the main entry is often a good choice.
Installing step by step
- Hold the sign in position and check it is level.
- Ask someone to confirm it can be seen from around the pool.
- Mark the fixing holes.
- Drill pilot holes, using a wall plug for masonry.
- Fix securely with suitable screws or bolts. Don't overtighten.
Fixing to common surfaces
- Timber: stainless steel screws with a small pilot hole.
- Brick or render: masonry bit, wall plugs and stainless steel screws.
- Metal fences: self-tapping screws, or a bolt, nut and washer.
- Glass fencing: never drill glass. Use brackets made for glass, or a weatherproof high-bond tape for light signs, and check it over time.
Frequently asked questions
How high should I mount my sign?
Requirements vary by state and territory, so confirm with your local council or inspector. The goal is clear, constant visibility.
Can I use tape on any surface?
Mechanical fixings are more reliable on timber, brick and metal.
Plants are blocking my CPR sign. What now?
Trim or move them so the sign is always visible.
If you need a durable, compliant sign, browse the range at Pool Signs Australia.
